Inquadra Special Rolling Shutter FM Door - bim

Inquadra Special Rolling Shutter FM Door

Publié par ENEA GRAVA le 13/06/2018

Fabricant : DE FAVERI srl

INQUADRA FM for special rolling shutter consists of a high-density EPS body with 0.035 W/m²k lambda, for a total thickness of 100mm. The PVC ledge profile of the frame has been designed to accommodat...

INQUADRA FM for special rolling shutter consists of a high-density EPS body with 0.035 W/m²k lambda, for a total thickness of 100mm. The PVC ledge profile of the frame has been designed to accommodate a self-expanding seal to lay the frame on and a net on the opposite side, to prevent micro-hair cracks between the profile and the levelling. The sliding of the clamps allows anchoring it perfectly to the wall, even if irregular. Once laid, INQUADRA for SPECIAL ROLLING SHUTTER only needs final smoothing, making it level with the façade. INQUADRA FM special rolling shutter is combined with a made-to-measure pre-guide, the introduction of disposable EPS preserves its cleanliness. The fourth DF side completes the solution.

En voir plus Réduire
controtelaio Isolamento Termico Isolante
  • Informations
  • Photos 0
  • Modèles 3D 0
  • Modèles 2D 0
  • Documentation 4
  • Propriétés & Variations 0
  • Classifications 5
  • Pays de distribution
Nom de fichierExtensionTailleLogicielNiveau de détailUploadé par
Nom de fichierExtensionTailleLogicielNiveau de détailUploadé par

Documents stockés dans la base BIM&CO

Nom du documentTypeLangue du document

Nom du document externeTypeLangue du document

Propriétés de l'objet