Inquadra Rolling Shutter FM Window - bim

Inquadra Rolling Shutter FM Window

(BimObjectDetails - LikeAltImg)0 (BimObjectDetails - DownloadAltImg)7

Publicado por ENEA GRAVA sobre 13/06/2018

Fabricante : DE FAVERI srl

INQUADRA FM rolling shutter consists of a high-density EPS body with 0.035 W/m²k lambda, for a total thickness of 100mm. The PVC ledge profile of the frame has been designed to accommodate a self-expa ...

INQUADRA FM rolling shutter consists of a high-density EPS body with 0.035 W/m²k lambda, for a total thickness of 100mm. The PVC ledge profile of the frame has been designed to accommodate a self-expanding seal to lay the frame on and a net on the opposite side, to prevent micro-hair cracks between the profile and the levelling. The sliding of the clamps allows anchoring it perfectly to the wall, even if irregular. Once laid, INQUADRA ROLLING SHUTTER only needs final smoothing, making it level with the façade. The system provides for aligning the shoulder with the box and with the 4th side, with the advantage of making the window opening in a regular shape instead of the classical "T" shape. INQUADRA FM rolling shutter can be matched with three types of guide or pre-guides; the introduction of disposable EPS preserves its cleanliness. The fourth DF side completes the solution.

Ler mais Ler menos
  • Informações
  • Fotos 0
  • Modelos 3D 0
  • Modelos 2D 0
  • Documentos 3
  • Propriedades e variantes 0
  • Classificações 5
  • Países de distribuição
Nome do ficheiroExtensão do ficheiroDimensõesSoftwareNível de detalhes (LOD)Transferido por
Nome do ficheiroExtensão do ficheiroDimensõesSoftwareNível de detalhes (LOD)Transferido por

Documentos BIM&CO arquivados

Nome do documentoTipoIdioma do documento

Nome do documento externoTipoIdioma do documento

Propriedades do objeto BIM

As opiniões sobre este objeto BIM