Inquadra Special Rolling Shutter Window - bim

Inquadra Special Rolling Shutter Window

Publicado por ENEA GRAVA sobre 13/06/2018

Fabricante : DE FAVERI srl

INQUADRA FM for special rolling shutter consists of a high-density EPS body with 0.035 W/m²k lambda, for a total thickness of 100mm. The PVC ledge profile of the frame has been designed to accommodat...

INQUADRA FM for special rolling shutter consists of a high-density EPS body with 0.035 W/m²k lambda, for a total thickness of 100mm. The PVC ledge profile of the frame has been designed to accommodate a self-expanding seal to lay the frame on and a net on the opposite side, to prevent micro-hair cracks between the profile and the levelling. The sliding of the clamps allows anchoring it perfectly to the wall, even if irregular. Once laid, INQUADRA for SPECIAL ROLLING SHUTTER only needs final smoothing, making it level with the façade. INQUADRA FM special rolling shutter is combined with a made-to-measure pre-guide, the introduction of disposable EPS preserves its cleanliness. The fourth DF side completes the solution.

Ler mais Ler menos
controtelaio finestra Isolamento Termico Isolante
  • Informações
  • Fotos 0
  • Modelos 3D 0
  • Modelos 2D 0
  • Documentação 4
  • Propriedades e variantes 0
  • Classificações 5
  • Países de distribuição
Nome do ficheiroExtensão do ficheiroDimensõesSoftwareNível de detalhes (LOD)Transferido por
Nome do ficheiroExtensão do ficheiroDimensõesSoftwareNível de detalhes (LOD)Transferido por

Documentos BIM&CO arquivados

Nome do documentoTipoIdioma do documento

Nome do documento externoTipoIdioma do documento

Propriedades do objeto BIM