AXO-S 300
86.4
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
224.64
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
280
0.0096
280
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 300+BOXSTAR
224.64
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.0096
125
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
86.4
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 300+BOXSTAR/S
224.64
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.0096
125
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
86.4
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 310
86.4
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
224.64
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
289
0.0096
289
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 310+BOXSTAR
224.64
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.0096
125
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
86.4
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 310+BOXSTAR/S
224.64
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.0096
125
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
86.4
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 400
180.9
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
426.924
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
376
0.0201
376
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 400+BOXSTAR
426.924
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.0201
200
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
180.9
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 400+BOXSTAR/S
426.924
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.0201
200
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
180.9
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 500
261
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
563.76
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
476
0.029
476
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 500+BOXSTAR
563.76
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.029
200
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
261
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 500+BOXSTAR/S
563.76
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.029
200
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
261
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 600
396
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
839.52
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
576
0.044
576
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 600+BOXSTAR
839.52
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.044
250
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
396
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 600+BOXSTAR/S
839.52
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.044
250
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
396
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 625
396
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
839.52
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
601
0.044
601
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 625+BOXSTAR
839.52
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.044
250
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
396
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 625+BOXSTAR/S
839.52
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.044
250
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
396
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 675
396
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
839.52
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
651
0.044
651
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 675+BOXSTAR
839.52
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.044
250
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
396
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 675+BOXSTAR/S
839.52
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.044
250
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
396
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 800
612
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
1028.16
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
776
0.068
776
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 800+BOXSTAR
1028.16
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.068
315
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
612
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 800+BOXSTAR/S
1028.16
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.068
315
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
612
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 825
612
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
1028.16
AXO (Difusores de aletas orientables)
Madel
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
801
0.068
801
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 825+BOXSTAR
1028.16
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.068
315
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
612
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán
AXO-S 825+BOXSTAR/S
1028.16
Madel
AXO (Difusores de aletas orientables)
UNE 23-727 M2/ NFP 92-501 M2/ DIN 4102 M2
0.068
315
Los difusores rotacionales de la serie AXO están diseñados para su aplicación en aire acondicionado, ventilación y calefacción. Su montaje se realiza en falsos techos o suspendidos del techo. El diseño de sus lamas y su disposición radial en la placa, provocan una impulsión rotacional del aire con efecto coanda, obteniendo así un elevado índice de inducción y reduciendo la estratificación. Sus aletas, orientables individualmente, permiten modificar el ángulo de impulsión y adaptar el difusor a diferentes arquitecturas. La sectorización de sus aletas garantiza un flujo de aire uniforme en toda la sección de paso. Los difusores de la serie AXO admiten una variación del caudal del 60% manteniendo la estabilidad de vena del aire. Estos difusores pueden ser utilizados en alturas de 2,6 hasta 4 metros y con un diferencial de temperatura de hasta 12º C.
612
The AXO swirl diffusers are designed to be applied in air conditioning ventilation and heating systems. They can be mounted in false ceilings or suspended from ceiling. The design of their vanes and its radial arrangement in the diffuser cause a swirl air supply with a coanda effect, which provides a high level of induction rate of the air in the atmosphere and reducing the stratification. Their individually adjustable vanes allow to change the supply angle to adjust the diffuser to the different architectonics environments. Their sectored vanes emit a uniform air flow all over the passage section. The AXO series diffusers admit a flow variation of 60% keeping the air stream stable. These diffusers can be used from 2,6 up to 4 meters high and at a temperature differential up to 12ºC.
23-33 41 13
D3040
23 82 14
Centrales de tratamiento de aire
22/12/2017 17:57:23
https://www.bimandco.com/es/users/qiab4y2sa3s
Raúl Galdrán